Measure* | Incentive |
---|---|
LED screw-in | $0.08 to $0.22 per watt saved |
LED tubes (Type A, B & DM) | $0.50 per ft |
LED tubes – Type C | $0.02 or $0.05 per kWh saved |
LED hardwired conversion/LED level 1 retrofit kit | $0.08 or $0.10 per kWh saved |
New LED fixture or LED level 2 retrofit kit | $0.12 or $0.15 per kWh saved |
New LED fixture or LED level 2 retrofit kit with integrated controls | $0.14 to $0.20 per kWh saved |
New LED fixture or LED level 2 retrofit kit with networked lighting controls | $0.18 or $0.22 per kWh saved |
Lighting controls (on existing fixtures) | $15 to $35 per fixture |
LED exit sign | $40 per sign |
Sign lighting | $0.10 or $0.12 per kWh saved |
Refrigeration cases | $0.08, $0.12, or $0.15 per kWh saved |
T12 to T8 | $10 to $55 per fixture |
New T5/T8 High Bay | $75 to $200 per fixture |
Permanent fixture removal with retrofit | $15 to $30 per fixture |
Full details are available within the Standard Lighting Incentives.
*Must use licensed electrical contractor, licensed in the state where work is performed. (Exceptions: Screw in LEDs and T8/T5 relamps)
Idaho Customers
- 25 Line (Posted Aug. 17, 2020) For projects completed and submitted to Idaho Power by April 30, 2021. Terms apply.
- 100 Line (Posted Aug. 17, 2020) For projects completed and submitted to Idaho Power by April 30, 2021. Terms apply.
- 400 Line (Posted Aug. 17, 2020) For projects completed and submitted to Idaho Power by April 30, 2021. Terms apply.
Oregon Customers
If your project doesn’t fall within our menu of incentives, we may be able to offer an incentive of 18 cents per kilowatt hour saved, up to 70% of the eligible project cost for other qualifying custom projects.
Pre-approval is needed for projects with estimated incentives of $1,500 or more, or complete lighting upgrade projects. Obtain pre-approval from Idaho Power before the project begins.
Pre-Approval Application Process
- Download the Excel Lighting Tool and enter project information on the Data Entry, Product Type and Proposed Lighting tabs. If applicable, also enter information on the Lighting Controls tab.
- Print the Pre-Approval Application from the Lighting Tool. Customer reviews, signs and dates the application.
- Gather manufacturer specification sheets for equipment to be installed.
- Email the above items to lighting@idahopower.com.
- Idaho Power reviews the submitted paperwork and sends written pre-approval via email.
Payment Application Process
For completed projects that did not require pre-approval or for completed pre-approved projects, submit the Payment Application within 90 days of project completion.
- Download the Excel Lighting Tool (if no preapproval was required) and enter project information OR update your existing Lighting Tool (e.g., change status box on the Data Entry tab to “Payment Application,” update Project Start and Completion dates, and make needed edits to reflect the project as installed).
- Print the Payment Application from the Lighting Tool. Customer reviews, fills out the Incentive Check Recipient information section, signs and dates the application.
- Gather detailed labor and material invoices.
- For projects not pre-approved, submit manufacturer specification sheets for installed equipment.
- Email the above items to lighting@idahopower.com.
- Idaho Power reviews the submitted paperwork and processes incentive payment.
NOTE: Idaho Power reserves the right to perform a site inspection. You or your contractor will be notified if your project is selected for inspection.
Looking for a licensed electrical contractor for your business lighting retrofit? View a list of contractors.
Project requirements apply. Please reference specifications section on the Standard Lighting Incentives sheet within the lighting tool. Additional criteria is available in the Policies and Procedures Manual.
Note: Program continuation, eligibility requirements and terms and conditions apply.
For assistance with a PDF on this page or to request a PDF in an alternate format, please contact Customer Service at 208-388-2323 or 1-800-488-6151