All Idaho Power customers who own or operate an irrigation system used for irrigation of agricultural crops or pastures receiving electricity from Idaho Power.
Yes, submit an application for each pump service location. However, if you received an incentive for specific components at a given service location, those same components are not eligible for an incentive again for three years.
Complete and sign a Menu Incentive application, attach the required receipts or invoices itemizing the sprinkler parts, and mail to Idaho Power within one year from the date of purchase or email to firstname.lastname@example.org.
If the project is installed differently than proposed, energy savings and the incentive will be recalculated.
It is funded through the Energy Efficiency Services charges collected monthly on Idaho Power customers’ bills, as approved by the Idaho Public Utilities Commission.
Energy efficiency benefits all of our customers because it helps delay the need to acquire more costly resources to meet the load of the electric system. Energy efficiency is good for your business because it can reduce your costs.
You may contact your area Idaho Power agriculture representative and/or seek recommendations and bids from local irrigation system dealers.
Idaho Power calculates the anticipated energy savings for your project. Calculations are based on previous energy use and the proposed pump modifications or new system specifications. Qualifying projects receive a notice along with an Irrigation Efficiency Rewards Program Agreement, which must be signed by you and returned to Idaho Power. Idaho Power reserves the right to deny Custom Incentive participation for irrigation systems that do not comply with industry standards.
Idaho Power calculates the energy-savings estimate based on past energy use data for the service location and compares it to the calculated energy use of the system with the proposed changes. The calculated number is based on the submitted information. This energy savings estimate is multiplied by $0.25 per kWh or $450 per kW and compared to 75 percent of the total project cost to determine which is less. The incentive can change if the final invoices vary from the original estimate.
Idaho Power verifies the qualifying items purchased and multiplies that by the pre-determined incentive amount to calculate the total incentive amount. The incentive paid will be the lesser of the incentive or the actual amount paid, unless otherwise restricted by the 50 percent cost limitation.
Idaho Power is committed to the success of this program. To ensure the program benefits you and Idaho Power, you will be asked to sign the agreement that sets forth the specific terms and conditions of this program.
All proposals to reduce the energy use of an irrigation system will be considered.
Example modifications may include:
- Low-pressure pivot or linear packages (15 psi if possible)
- Reduced-pressure nozzles with 40-foot riser spacing
- Pumps that operate zones of the system at different pressures
- Larger mainlines to reduce friction loss
- Pipe to utilize gravity pressure
- Replacing a pump with one more appropriate for the system
- Lowering the flow rate of a pump through increased application efficiency (savings caused by reduced acres will not qualify)
- Installing multiple pumps that can run independently when part of the system is turned off
- Installing a variable speed drive (must be IEEE Standard 519 compliant)
- Installing flow-control nozzles
- Installing high-efficiency motors